5C Direct Collets – Imperial

5C Direct Collets Imperial

Available in a range of different sizes.

Quality, durable items – built to last.

Wide range of imperial sizes available

• 1/16″ (Item No. 2540) 
• 3/32″ (Item No. 2541) 
• 1/8″ (Item No. 2542) 
• 5/32″ (Item No. 2543) 
• 3/16″ (Item No. 2544) 
• 7/32″ (Item No. 2545) 
• 1/4″ (Item No. 2546) 
• 9/32″ (Item No. 2547) 
• 5/16″ (Item No. 2548) 
• 11/32″ (Item No. 2549) 
• 3/8″ (Item No. 2550) 
• 13/32″ (Item No. 2551) 
• 7/16″ (Item No. 2552) 
• 15/32″ (Item No. 2553) 
• 1/2″ (Item No. 2554) 
• 17/32″ (Item No. 2555) 
• 9/16″ (Item No. 2556) 
• 19/32″ (Item No. 2557) 
• 5/8″ (Item No. 2558) 
• 21/32″ (Item No. 2559) 
• 11/16″ (Item No. 2560) 
• 23/32″ (Item No. 2561) 
• 3/4″ (Item No. 2562) 
• 25/32″ (Item No. 2563) 
• 13/16″ (Item No. 2564) 
• 27/32″ (Item No. 2565) 
• 7/8″ (Item No. 2566) 
• 28/32″ (Item No. 2567) 
• 15/16″ (Item No. 2568) 
• 31/32″ (Item No. 2569) 
• 1″ (Item No. 2570) 
• 1 1/32″ (Item No. 257)

Direct collets

• These collets are an alternative to the collet chuck system.
• Each direct collet is held by the machine drawbar.
• As the collet is drawn into the quill it firmly clamps around the end mill / slot drill shank.
• Both plain and threaded shank cutters can be used.
• Direct collets do not overhang which allows maximum capacity between the spindle and table.
• Collets can be purchased individually and are therefore very affordable.

Also available

• 5C collets in metric sizes here